WeldPeak is a cloud-based platform for welding documentation and quality management. Behind it stands a group of industry professionals. It is the leading welding software, covering even what you didn't know you needed.
Built on the foundation of European welding standards
01 — What WeldPeak does
From welder qualifications to robotic cell setup guides, from pWPS to automatic WPQR ranges, from ISO 3834 manuals to a fully customizable FROSIO report — WeldPeak brings it all into a single toolkit.
01
Qualifications, WPSs, procedure tests and their qualification ranges flow as a single chain. ISO 9606 validity dates, recertifications and certificate expiries are visible in real time, and calcWPQR fills in ISO 15614-1 qualification ranges automatically — 10 fields with one click.
02
From the project to the handover file as a single chain: the project register, the welding work order, the weld joint register and welder allocation record what is being made, who welds it and to which procedure. Traceability is captured joint by joint — heat number, filler batch and gas cylinder — and the component register, dimensional checks, bolt tightening records, reviews and material certificates all attach to the same component. The ITP matrix shows at a glance what a component is still missing before delivery, non-conformities and repair welding permits run through a state machine until closure, and the handover package assembles the documentation for the client and for CE marking.
03
The welding coordinator's quality documentation arrives on demand: ISO 3834 manuals, EN 1090 factory-production-control forms and work instructions, always current. VT, MT, UT, PT, RT and FROSIO inspection reports are fully customisable with your company's branding — own logos, headings and signature blocks — and destructive qualification tests (macro, bend and tensile) are recorded in the same place. Legacy certificates and WPSs/WPQRs built in other software are dropped in as PDFs and an AI parser extracts the fields automatically.
04
Audit readiness is not a separate project but a figure that updates from your own data — every requirement has a home in some register. ISO 3834-2, EN 1090-1/-2, EN 15085, ISO 9001 and ISO 14001 are covered. Rolling stock manufacturers get the entire EN 15085 scope as its own module: certification level CL, the responsible welding coordinator, weld performance classes CP, inspection classes CT with their NDT extents, the manufacturer's welding certificate, the pre-production weld and the responsibility matrix. Welding of reinforcing steel to ISO 17660-1 runs a chain of its own, from pWPS to the production log. On top of that, the machine calibration register and standard revision tracking — the items an auditor asks about every single time.
05
Welders and supervisors get a mobile view of their own: the day's work, signing off a joint, a non-conformance notice with a photo, their own qualification and the valid WPS in their pocket, plus calculators and a heat input timer. In the workshop and on site the network drops exactly when the sign-off is due, so entries are queued on the device and sent by themselves once the connection returns — a weld never ends up without a record. A worker sees only their own work, and that limit is enforced on the server, not in the interface.
06
Included as well: a library of 2 000+ base materials grouped per ISO/TR 15608, 84 filler metals by FM group and 17 shielding gases per ISO 14175, the FROSIO inspector's knowledge base, a comprehensive robotic-welding setup guide, and per-weld calculators (preheat, t8/5, CEV, throat thickness, heat input). Work instructions are assembled from blocks and stay in sync with the WPS register. A steel carbon-footprint calculator is included: a cradle-to-gate estimate by production route, for EPD comparison and for anticipating the environmental data required under the CPR and CBAM reporting. Coming next: ERP integration with common workshop systems.
Question → answer
The kind that come up mid-job, when the answer is needed right away.
?01
?02
?03
?04
?05
?06
Audit readiness
Audit prep has traditionally been a two-week slog — whether it's an ISO 3834, EN 1090, EN 15085 or ISO 17660-1 audit: stacking Excel files, hunting down WPSs, scrambling to find welder qualifications. In WeldPeak the material is together every day, and the readiness figure is calculated from your own data.
Audit readiness
Updates from your own data
Every requirement has a home in some register — as the register fills up, the figure rises by itself.
Why WeldPeak
Manual re-keying, repair welds and follow-up audits cost a workshop money every week. These three are the largest items — and every one of them is preventable.
€450
Per week
The same value gets typed by hand from the procedure test into the WPQR, from there into the WPS and the qualification ranges. In WeldPeak it is entered once and carries itself downstream. Ten hours of manual entry a week costs about €450 at a welding coordinator's labour cost (~€45/h) — over €20,000 a year.
+€1,500
Per marking error
A wrong welding symbol in production or an expired welder qualification doesn't stop at one joint — it applies to the whole series. Direct repair cost runs €150 – 800 per weld, with re-inspection and repeat NDT on top: a handful of welds clears €1,500. WeldPeak stops bad data from reaching production at the source.
€2,000
Per follow-up audit
A major nonconformity in a welding audit (ISO 3834, EN 1090, EN 15085, ISO 17660-1) triggers a follow-up audit: the auditor returns to check whether it was closed within the deadline. An auditor day plus travel runs €1,000 – 2,000, with the correction work and delayed deliveries on top. WeldPeak keeps the documentation in the shape where the nonconformity never arises.
02 — Who it's for
One demand runs through all of them: the paperwork has to survive inspection. WeldPeak scales from a 10-person workshop to a multi-site fabricator, from an ISO 3834 quality system to EN 1090 CE-marking authorization. Designed by an IWE, tested in the field.
Industries
Qualification ranges, procedure tests and standard interpretation on one platform. Test planning tells you how many tests you actually need.
The whole 3834 quality system in one place: documentation, traceability, training register and a clear allocation of responsibilities.
Work orders, joint sign-offs and non-conformities from the floor. Supervisors see where the project stands but do not edit documents — the server enforces the line.
VT, MT, UT, PT and RT plus FROSIO surface conditions as reports that come out right the first time. Destructive qualification tests too: macro, bend and tensile.
Certificates in one place, your own WPSs available on mobile, validity dates visible. Sign-offs queue up when the site network drops.
Audit readiness for five standards from the company's own data, management system documents and standard revision tracking — without asking anyone for their Excel file.
For external coordinators
Consultant or external welding coordinator? WeldPeak gives you a single workspace from which you manage the entire documentation of multiple customer organisations — with their own logos, their own report templates, their own quality manuals.
Ask about consultant pricingSwitch the active organisation with a single click. Customer data stays isolated, but you have one login and one billing relationship.
Swap logos, company names and signature blocks per customer, and give each one their own form templates — VT, MT, UT, FROSIO with the fields they want. Every report looks like the customer made it themselves.
A complete quality manual ready for audit with one click — templates ready, content filled with the client's data.
A task log per client covering 12 months. You show the auditor which coordination duties were carried out and when — and yourself what you are about to invoice.
Audit readiness per client organisation, calculated from each one's own data. You see who needs you next month without opening a single folder.
An approved WPS is locked, and a change automatically creates a new revision. A client cannot alter a document after the fact without it showing — your liability stays bounded.
Pricing
A one-off setup fee covers the initial scoping and tailoring. The monthly fee scales with the number of users. The exact price is agreed in the quote based on your needs.
from
€500
Setup — one-off fee or 1–12 month payment plan
from
€30 / month
Per user, monthly
A fraction of what a single failed audit costs — not to mention the coordinator hours saved.
All prices excluding VAT
Request a quote03 — Contact
WeldPeak is in beta. Official release during 2026. Leave your details using the form below and we'll personally let you know when WeldPeak launches. We always invest in personal, one-to-one service.
Or get in touch directly
Aleksi Souru
Founder / Designer
Made in Finland
